Your
computer
does
not
recognize
your
camera.
• Check that the camera
is
turned on.
• When the battery level
is
low, install the charged battery pack (page 16), or
use the AC Adaptor/charger (not supplied).
• Use the USB cable (supplied) (page 128).
• Disconnect the USB cable, and connect
it
again firmly.
• Set [USB connection] to [Mass Storage] (page 128).
• Disconnect all equipment other than the camera, the keyboard and the
mouse from the USB jacks
of
your computer.
• Connect the camera directly to your computer without passing through a
USB hub or other device (page 127).
You
cannot
copy
images.
• Make the USB connection
by
properly connecting the camera with your
computer (page 128).
• Follow the designated copy procedure for your OS (page 129).
• When you shoot images with a memory card formatted
by
a computer, you
may not be able to copy the images to a computer. Shoot using a memory
card formatted
by
your camera (page 117).
The
image
cannot
be
played
back
on
a
computer.
• If you are using "Picture Motion Browser," refer to the "Picture Motion
Browser Guide."
• Consult the computer
or
software manufacturer.
After
making
a
USB
connection,
"Picture
Motion
Browser"
does
not
start
automatically.
• Make the USB connection after the computer
is
turned
on
(page
128).
You
do
not
know
how
to
operate
the
software
(supplied).
• See the help or the guide
of
each software.
Cannot
insert
a
memory
card.
• Insertion direction
of
the memory card
is
wrong. Insert
it
in
the correct
direction (page 21).
156
To Next Page
Loading...
