- Never block the slots and openings by
placing the set on a bed. sofa. rug.
or
other
similar surface.
-
Never
place the set in a confined space,
such as a bookcase.
or
built-in cabinet.
unless
proper
ventilation
is
provided.
-
Do
not place the set near
or
over
a
radiator
or
heat register,
or
where
it
is
exposed
to
direct sunlight.
Lightning
For added protection for this sel during a
lightning storm,
or
when
it
is
left
unattended and unused for
long
periods
of
time,
unplug
it
from the wall outlet
and
disconnect the antenna
or
cable system.
This
will prevent damage to the set due
to
lightning and power-line surges.
Service
Damage
Requiring
Service
Unplug
the
sel
frol111he wall
outlet
and
refer servicing
to
qualified service
personnel under the following conditions:
- When the power cord
or
plug is
damaged
or
frayed.
-
If
liquid has been spilled
or
objects have
fallen into the set.
-
If
the set has been exposed to rain
or
water.
- If the set has been subject to excessive
shock by being dropped.
or
the cabinet
has been damaged.
- If the set does not operate normally when
following the operating instructions.
Adjust
only
those controls that are
specified in the operating instructions.
Improper adjustment
of
other
controls
may result in damage and will often
require extensive work by a qualified
technician to restore the set to normal
operation.
-
When
the setexhibits a distinct change in
performance - this indicates a need for
service.
Servicing
Do not attempt to service the set yourself
as
opening
or
removing covers may
expose
you to dangerous voltage
or
other
hazards.
4
Refer all servicing to qualified service
personnel.
Replacement
parts
When replacement parts are required. be
sure the service technician has used
replacement parts specified by the
manufacturer that have the same
characteristics as the original parts.
Unauthorized substitutions may result in
fire. electric shock,
or
other
hazards.
Safely
Check
Upon completion
of
any service
or
repairs
to the set. ask the service technician to
perform routine safety checks (as specified
by the manufacturer) to determine that the
set
is
in safe operating condition.