Sony DSLR-A350 - Lens Hood; Attaching a Lens

Rear cap
Attaching a lens
1 Remove the body cap from the
camera and the rear cap from the
lens.
2 Mount the lens by aligning the
orange index marks on the lens
and camera.
•
""tI
-.
CD
'C
C»
~.
-
:'
CD
n
C»
3
CD
-.
C»
Orange index marks
3 Turn the lens clockwise until it
clicks into the locked position.
Notes
• When attaching a lens, do not press the lens release button.
• Do not use force when attaching a lens.
lens hood
Using a lens hood is recommended to prevent unnecessary light from
affecting your images.
For attaching, refer to the operating instructions
supplied with the lens.
19