Sony MCS-8M - Replacement of Main Parts

1-3. Replacement of Main Parts
1-3-1. Top Panel Assembly
1. Remove the seven screws.
B3 x 6
B3 x 6
2. Open the top panel assembly.
Note
Open the top panel assembly from the rear side. If it is opened from the front side, parts may be damaged.
Top panel assembly
Rear side
3. Disconnect the flexible flat cable (45 cores) from the connector CN353 on the KY-671 board.
4. Release the harness from the harness clamp and disconnect the harness from the connector CN1401 on the KY-671
board.
MCS-8M
1-13