1-3-6. CN-3403 Board
Preparation
1. Remove the top panel assembly. (Refer to “1-3-1. Top Panel Assembly”.)
Procedure
1. Disconnect the flexible flat cable (50 core) from the connector CN900 on the CN-3403 board.
2. Remove the three screws (B3 x 6) to detach the board assembly-2.
B3 x 6
Board assembly-2
CN900 (CN-3403 board)
Flexible flat cable
(50 core)
3. Remove the three screws (PSW3 x 8).
4. Remove the two screws (BVTP3 x 8), two screws (P2.6 x 4), and two screws (BVTT2.5) to remove the CN-3403
board.
PSW3 x 8
P2.6 x 4
P2.6 x 4
BVTP3 x 8
BVTT2.5 (S)
CN-3403 board
5. Install the removed parts by reversing the steps of removal.
MCS-8M
1-19
To Next Page
Loading...
