Procedure
1. Hold the F grip (A) and turn the F grip (B) in the arrow direction to detach it.
2. Reverse the top panel assembly.
3. Disconnect the harness from the connector CN402 on the VR-345 board.
4. Remove the two screws and remove the fader assembly.
PSW3 x 8
Fader assembly
CN402 (VR-345 board)
Harness
5. Remove the two screws and remove the VR-345 board.
6. Install the removed parts by reversing the steps of removal.
MCS-8M
1-18
To Next Page
Loading...
