Sony MCS-8M - SW-1521 Board

4. Disconnect the harness from the connector CN404 on the KY-671 board.
Flexible board Flexible board
Harness
CN404 (KY-671 board)
CN405 (KY-671 board)
CN407 (KY-671 board)
5. Remove the seventeen screws to remove the KY-671 board.
PSW3 x 8
PSW3 x 8
PSW3 x 8
KY-671 board
Holes
Bosses
6. Install the removed parts by reversing the steps of removal.
Note
Match the bosses and the two holes when installing the KY-671 board.
1-3-10. SW-1521 Board
Preparation
1. Remove the top panel assembly. (Refer to “1-3-1. Top Panel Assembly”.)
2. Remove the KY-671 board. (Refer to “1-3-9. KY-671 Board”.)
MCS-8M
1-23