Sony MHC-V21 - Page 7

MHC-V21/V21D
7
NOTE OF REPLACING THE IC2002 ON THE MOTH-
ERBOARD BOARD AND THE COMPLETE MOTHER-
BOARD BOARD
When IC2002 on the MOTHERBOARD board and the complete
MOTHERBOARD board are replaced, it is necessary to spread the
compound between parts and heat sink. After that, execute “3. IC
and MOTHERBOARD board after repair checking guide” (page
29).
Part No. Description
7-300-009-67 THERMAL COMPOUND (TIG2000)
Spread the compound referring to the fi gure below.
IC2002
thermal compound (TIG2000)
– MOTHERBOARD Board (Component Side) –
Ver. 1.1
SYSSET
2018/08/2821:56:45(GMT+09:00)