Sony MHC-V5 - Setting the Clock; Changing the Display Mode

MHC-V5.GB.4-531-350-11(1)
14
GB
Setting the clock
1
Press  to turn on the system.
2 Press TIMER MENU.
If “TIMER SEL” appears on the
display, press

/

repeatedly to
select “CLOCK SET,” then press .
3 Press

/

repeatedly to set the
hour, then press .
4 Press

/

repeatedly to set the
minutes, then press .
Note
You cannot set the clock in Power Saving
Mode.
Changing the display
mode
Press DISPLAY repeatedly while
the system is turned o.
Each time you press the button, the
display mode changes as follows.
Demonstration
The display scrolls messages
about the main features of this
system using the built-in LEDs for
illumination.
No display (Power Saving Mode)
The display is turned o to conserve
power. The timer and clock continue
to operate.
Clock
The clock display automatically
turns to Power Saving Mode after a
few seconds.