MHC-V5.GB.4-531-350-11(1)
28
GB
Erasing all the pairing
registration information
Use the buttons on the unit to
perform this operation.
1 Press BLUETOOTH to select the
BLUETOOTH function.
“BLUETOOTH” appears on the
display.
If the system is connected to a
BLUETOOTH device, the BLUETOOTH
device name appears on the
display. Press BLUETOOTH to
terminate the BLUETOOTH
connection.
2 Hold down and FLANGER for
about 3 seconds.
“BT HISTORY” and “CLEAR” appear
on the display and all the pairing
information is erased.
Setting the BLUETOOTH
audio codecs
You can select the BLUETOOTH
audio codecs when the connected
BLUETOOTH device supports
Advanced Audio Coding (AAC).
1 Press OPTIONS on the unit.
2 Press
/
repeatedly to select
“BT AAC,” then press .
3 Press
/
repeatedly to select
“ON” or “OFF,” then press .
ˎ
ON: Select this setting if the
BLUETOOTH device supports
Advanced Audio Coding (AAC).
ˎ
OFF: Select this setting if
the BLUETOOTH device only
supports Sub Band Codec
(SBC).
Notes
ˎ
You can enjoy high quality sound if
the AAC is selected. In case you cannot
listen to AAC sound from your device,
select “OFF.”
ˎ
If you change this setting while the
system is connected to a BLUETOOTH
device, the BLUETOOTH device will
be disconnected. To connect to the
BLUETOOTH device, perform the
BLUETOOTH connection again.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
