MHC-V5.GB.4-531-350-11(1)
20
GB
Transferring music from a disc
or USB device
You can easily transfer all the
music on a disc or USB A to USB B
(Synchronized Transfer). You can
also transfer a single track or audio
file during playback (REC1 Transfer).
1 Connect a USB device to the B
port.
USB device
Note
You can use a USB adaptor (not
supplied) to connect the USB device
to the unit if the USB device cannot be
plugged into the
port.
2 Select the function.
Discs:
Press CD, then load the disc.
USB:
Press USB repeatedly until “USB A”
lights up on the display, then
connect the USB device containing
audio files you want to transfer to
A port.
3 Prepare the sound source.
Synchronized Transfer:
When playback is stopped, press
PLAY MODE repeatedly to select the
play mode you want.
Notes
ˎ
If you start transferring in Shue
Play (“FLDR SHUF”), the selected
play mode changes to “FLDR”
automatically.
ˎ
If you start transferring in Shue
Play (except “FLDR SHUF”), Repeat
Play or Program Play with no steps,
the selected play mode changes to
Normal Play automatically.
REC1 Transfer:
Select the track or audio file you
want to transfer, then start
playback.
4 Press REC TO USB B on the unit.
“PUSH ENTER” appears on the
display.
5 Press ENTER on the unit.
The transfer starts when
“DO NOT REMOVE” appears on the
display.
Do not remove the USB device until
the transfer is complete.
When the transfer is complete, the
system performs as follows:
Synchronized Transfer:
When the transfer is complete, the
disc or USB device stops
automatically.
REC1 Transfer:
The transfer is completed
automatically, but the disc or USB
device continues to play the next
track or file.
To stop transfer
Press .
To Next Page
Loading...
Need help?
General
Weight and Dimensions
