MHC-V5.GB.4-531-350-11(1)
34
GB
Enjoying the Party Chain
Perform the following procedure to
activate the Party Chain function.
1 Plug in the AC power cord and
turn on all the systems.
2 Adjust the volume on each
system.
3 Activate the Party Chain
function on the system to be
used as the Party Host.
Press FUNCTION on the Party Host
repeatedly to select the function
you want (except the audio in
function), then start playback.
Hold down MUSIC/PARTY CHAIN on
the Party Host for 2 seconds.
“PARTY CHAIN” appears on the
display for 2 seconds. The Party
Host starts the Party Chain, and
other systems become Party Guests
automatically. All systems play the
same music as that being played by
the Party Host.
Notes
ˎ
Depending on the total unit of systems
you have connected, Party Guests may
take some time to start playing the
music.
ˎ
For detailed operation on other
systems, refer to the operating
instructions of the systems.
To select a new Party Host
Repeat step 3 of “Enjoying the Party
Chain” on the system to be used
as a new Party Host. The current
Party Host becomes Party Guest
automatically. All systems play the
same music as that being played by
the new Party Host.
To deactivate the Party Chain
Hold down MUSIC/PARTY CHAIN on
the Party Host for 2 seconds.
Notes
ˎ
Changing the volume level and sound
eect on the Party Host will not aect
the output on the Party Guests.
ˎ
The Party Guests continue playing the
music source from the Party Host even
if you change the function on any of the
Party Guests. However, you can adjust
the volume and change the sound
eect on any of the Party Guests.
ˎ
When you use the microphone on Party
Host, the sound will not be output from
Party Guests.
ˎ
The system which is not equipped with
Party Chain function cannot become a
Party Host.
Setting the Party Chain
sound mode
You can set the sound mode when
the Party Chain function is activated.
1 Press OPTIONS on the unit.
2 Press
/
repeatedly to select
“P.CHAIN MODE,” then press .
3 Press
/
repeatedly to select
“STEREO,” “RIGHT CH” or
“LEFT CH,” then press .
ˎ
STEREO: outputs the stereo
sound.
ˎ
RIGHT CH: outputs the
monaural sound of the right
channel.
ˎ
LEFT CH: outputs the monaural
sound of the left channel.
To exit the options menu, press
OPTIONS on the unit.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
