MHC-V5.GB.4-531-350-11(1)
32
GB
Other Operations
Using the Party Chain function
You can connect multiple audio systems in a chain to create a more
interesting party environment and to produce higher sound output.
A system in the chain will activate the Party Chain function as “Party Host” and
share the music. Other systems will become “Party Guests” and play the same
music as that being played by the “Party Host.”
Setting up the Party Chain
You can set up a Party Chain by connecting all the systems using audio cords
(not supplied).
Before connecting cords, be sure to disconnect the AC power cord.
If all the systems are equipped with Party Chain function
First system
Second system
Last system
Continue the connection
until the last system
Example: When connecting using this system as the first system
ˎ
Any system can become a Party Host in this connection.
ˎ
You can change the Party Host to a new Party Host after the Party Chain
function is activated on another Party Host. For details, see “To select a new
Party Host” (page 34).
ˎ
In this connection, the last system must be connected to the first system.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
