45
GB
MHC-V5.GB.4-531-350-11(1)
Additional Information
Party Chain
Party Chain function cannot be
activated.
ˎ
Check the connections
(page32).
ˎ
Make sure the audio cords are
connected correctly.
ˎ
Adjust the volume.
There is no sound when you select
the audio in function.
ˎ
Adjust the volume on the
connected equipment.
ˎ
Try turning o the system, then
turning it back on again.
“PARTY CHAIN” is flashing on the
display.
ˎ
The audio in function is selected
in the Party Chain function. Press
FUNCTION repeatedly to select
other function.
ˎ
Try turning o the system, then
turning it back on again.
To reset the system
If the system still does not operate
properly, reset the system to factory
default settings.
Use the buttons on the unit to
perform this operation.
1 Unplug the AC power cord, and
then plug it back in.
2 Press to turn on the system.
3 Hold down and BASS BAZUCA
at the same time for about 3
seconds.
“RESET” appears on the display.
All user-configured settings, such as
preset radio stations, timer, and the
clock are reset to factory default
setting.
Messages
One of the following messages may
appear or flash on the display during
operation.
CANNOT PLAY
A disc that cannot be played back
was inserted.
DEVICE ERROR
The USB device could not be
recognized or an unknown device is
connected.
DEVICE FULL
The memory of the USB device is
full.
FATAL ERROR
The USB device was removed during
transfer or erase operation, and may
have been damaged.
FLDR FULL
You cannot transfer onto the USB
device because the number of folder
has reached its maximum.
NO DEVICE
No USB device is connected.
NO DISC
There is no disc in the player.
NO MEMORY
The memory selected for playback
or transfer has no memory media
inserted in the USB device.
NO STEP
All of the programmed steps have
been erased.
NO TRACK
No playable file is loaded in the
system.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
