MHC-V5.GB.4-531-350-11(1)
18
GB
Creating your own program
(Program Play)
You can make a program of up to 25
steps in the order you want them to
be played back.
1 Select the function.
For CD function:
Press CD to select the CD function.
For USB function:
Press USB to select the USB
function.
2 When playback is stopped,
press PLAY MODE repeatedly
until “PGM” lights up on the
display.
3 (USB function only)
Press USB repeatedly to select
the USB device you want
(“USB A” or “USB B”).
4 (Except CD-DA discs)
Press +/– repeatedly to select
a folder.
If you want to program all files in
the folder, press and proceed to
step 6.
5 Press / repeatedly to
select the track or audio file you
want, then press .
Selected track
or file number
Total playing time of
program
(AUDIO CD only)
“--.--” appears when the total
playing time exceeds 100 minutes
for an AUDIO CD or when you
program an audio file.
6 Repeat steps 3 to 5 to program
additional tracks or audio files.
7 Press to start Program Play.
To delete the last step from the
program list
Press CLEAR when playback is
stopped.
To cancel Program Play
Press PLAY MODE repeatedly until
“PGM” disappear from the display
when playback is stopped.
Notes
ˎ
(CD function only) The program list is
cleared when you open the disc tray.
ˎ
(USB function only) The program list is
cleared when you:
perform the erase operation.
remove the USB device.
change the selected USB memory.
Playing repeatedly (Repeat
Play)
Press REPEAT repeatedly.
ˎ
: repeats all tracks or audio files
on a disc/USB device, or in the
specified folder/program.
ˎ
: repeats a track or audio file.
Note on the USB device
The playback order for the system may
dier from the playback order of the
connected digital music player.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
