EasyManuals Logo

Sony MHC-V5 Operating Instructions

Sony MHC-V5
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
MHC-V5.GB.4-531-350-11(1)
48
GB
ˎ
This system supports security functions
that comply with the BLUETOOTH
specification as a means of ensuring
security during communication using
BLUETOOTH technology. However, this
security may be insucient depending
on the setting contents and other
factors, so always be careful when
performing communication using
BLUETOOTH technology.
ˎ
Sony cannot be held liable in any way
for damages or other loss resulting
from information leaks during
communication using BLUETOOTH
technology.
ˎ
BLUETOOTH communication is not
necessarily guaranteed with all
BLUETOOTH devices that have the same
profile as this system.
ˎ
BLUETOOTH devices connected with
this system must comply with the
BLUETOOTH specification prescribed
by the Bluetooth SIG, Inc., and must
be certified to comply. However, even
when a device complies with the
BLUETOOTH specification, there may
be cases where the characteristics or
specifications of the BLUETOOTH device
make it impossible to connect, or may
result in dierent control methods,
display or operation.
ˎ
Noise may occur or the audio may
cut o depending on the BLUETOOTH
device connected with this system,
the communications environment, or
surrounding conditions.
Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION: (USA model
only)
Left/Right Channel:
With 5 ohm loads, both channels
driven, from 800 – 20,000 Hz;
rated 150 watts per channel
minimum RMS power, with no
more than 0.7% total harmonic
distortion from 250 milliwatts to
rated output.
Amplifier section
Power output (rated):
Left/Right Channel: 320 W +
320W (at 5 ohms, 1 kHz, 1% THD)
Power output (reference):
Brazilian model:
Left/Right Channel: 400 W +
400W (per channel at 5 ohms,
1kHz)
Subwoofer: 400 W (at 5 ohms,
1Hz)
Other models:
Left/Right Channel: 480 W +
480W (per channel at 5 ohms,
1kHz)
Subwoofer: 480 W (at 5 ohms,
1Hz)
Speaker section
Speaker system: Tweeter + Mid range
speaker + woofer
Tweeter L/R: 40 mm (1/in) cone type
Mid L/R: 100 mm (3/in) cone type
Woofer: 250 mm (9/in) cone type

Other manuals for Sony MHC-V5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony MHC-V5 and is the answer not in the manual?

Sony MHC-V5 Specifications

General IconGeneral
On/off switchYes
Product colorBlack
Recommended usageUniversal
Suitable for outdoor use-
Speaker type3-way
Driver diameter250 mm
Speaker positionFront
Tweeter diameter40 mm
Number of drivers3
Speaker placementFloor
Audio output channels1.0 channels
Mid-range driver diameter100 mm
Number of tweeter drivers1
Recommended amplifier power (max)240 W
Recommended amplifier power (min)0.5 W
Impedance5 Ω
Frequency range- Hz
RMS rated power1440 W
Peak Music Power Output (PMPO)15840 W
Number of amplifier channels2 channels
Power source typeAC
USB 2.0 ports quantity2
Connectivity technologyWired & Wireless
AC input voltage120 V
AC input frequency60 Hz
TypeHome audio mini system
Weight and Dimensions IconWeight and Dimensions
Depth325 mm
Width339 mm
Height908 mm
Weight18000 g

Related product manuals