How to fix Sony Camcorder R/W Limit(A/B)?
If your Sony Camcorder displays 'R/W Limit(A/B)', it means the memory card has reached its lifetime rewriting limit. Copy clips on the memory card to other media as required, and then exchange the memory card.
What to do if Sony Camcorder shows Unknown Media(A/B)?
If your Sony Camcorder displays 'Unknown Media(A/B)', it means the inserted memory card has been partitioned, or it contains more clips than the maximum that can be handled. Insert a memory card that has not been partitioned, or one that contains fewer than the maximum number of clips.
What to do if Sony Camcorder shows Memory(A/B) Error!?
If your Sony Camcorder displays 'Memory(A/B) Error!', it indicates an abnormality on the memory card and data restoration is needed. Perform data restoration on the device that was used to record to the memory card in question.
What to do if Sony Camcorder shows Turn off/on POWER!!?
If your Sony Camcorder displays 'Turn off/on POWER!!' after menu settings were changed, power the unit off and then on again to put the changes into effect.
How to fix Sony Camcorder memory A/B needs restoring?
If your Sony Camcorder displays 'Memory (A/B) needs Restoring', it means an error has occurred in the card. You should restore the card or format it.
General| Display | LCD |
|---|---|
| Internal | No |
| Product color | Black |
| Compatible memory cards | SxS |
| Video compression formats | MPEG, MPEG4 |
| AC input voltage | 100 - 240 V |
| Power consumption (typical) | 75 W |
| Operating temperature (T-T) | 5 - 40 °C |
| Operating relative humidity (H-H) | 20 - 90 % |
| BNC input ports | 4 |
| BNC output ports | 7 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 1 |
| Ethernet LAN | Yes |
| Ethernet interface type | Gigabit Ethernet |
Weight and Dimensions| Depth | 418 mm |
|---|---|
| Width | 210 mm |
| Height | 132 mm |
| Weight | 5200 g |
Details the unit's power supply types, voltage, and consumption.
Provides outside dimensions and notes for unit installation.
Lists and describes input/output connectors and necessary cables.
Describes onboard LED indicators and switches.
Outlines service actions required after replacing specific boards.
Provides an overview and procedures for replacing EEPROMs and FRAM.
Explains how to update the unit's firmware using a USB drive.
Explains how the unit detects and displays internal errors.
Lists main error codes and their descriptions.
Details alarms displayed on the status area and video monitor.
Introduces the Maintenance Menu and its helpful items for maintenance.
Used for audio system, video system, and free-run frequency adjustment.
Recommends periodic checks and parts replacement to maximize unit performance and lifespan.
Provides precautions and lists tools/fixtures for electrical adjustments.
Details the procedure for adjusting HD free-running frequency.
Details the procedure for adjusting SD free-running frequency.
Guides composite video signal output amplitude adjustment.
Details output and input level adjustments for the analog audio system.
Details the procedure for adjusting the DC IN +12 V supply.
To Next Page
