Menu List
102
Chapter 6 Menu and Detailed Settings
Input/Output
Makes settings related
to I/O signals.
Down Converter Crop/Letter/Squeeze Selects the signal conversion mode
for output of SD signals.
Crop: Crop the edges of the 16:9
picture and output as a 4:3
picture.
Letter: Mask the top and bottom of
the 4:3 picture and display in
the center of the screen as a
16:9 picture.
Squeeze: Squeeze the 16:9 picture
horizontally and output as a 4:3
picture.
Wide ID Through/Auto Selects whether to add a wide ID
signal to the SD output signal.
Through: Output without adding a
wide ID signal.
Auto: Add and output a wide ID
signal when the Down
Converter setting is Squeeze.
Super Impose
Makes settings related
to superimposed text
and markers.
Super(VF Display) On/Off When the setting of Input/Output
>SDI/HDMI Out Super or Video
Out Super is On, superimpose text
information on the output from the
HD/SD SDI OUT connector, HDMI
connector, and VIDEO OUT
connector, as specified (On or Off)
for each item.
Super(Menu) On/Off
Super(Timecode) On/Off
Super(Marker) On/Off When the setting of Input/Output
>Video Out Super is On, specifies
whether to superimpose markers on
the output from the VIDEO OUT
connector.
Super(Rec Status
Indicator)
On/Off Selects whether to superimpose (On)
or not impose (Off) the recording
status indication on the following
two outputs.
• Output from the VIDEO OUT
connector with Input/Output >Video
Out Super set to [On]
• Output from the SDI connector and
the HDMI connector with Input/
Output >SDI/HDMI Out Super set to
[On]
OPERATION
Menu items Sub-item Settings Description
To Next Page
