Saving and Loading Lens Files
146
Chapter 7 Saving and Loading User Setting Data
Note
The settings data (ALL file, scene file, reference file,
lens file) of this camcorder and the PMW-350 are not
compatible.
Use FILE >Lens (see page 135) in the setup menu
to set the data in lens files.
You can set the following data and save it as a
lens file.
See “Basic Setup Menu Operations” (page 97) for
information about menu operations.
To save a lens file to an SxS memory card, insert
the card into a memory card slot and then proceed
as follows.
See “Basic Setup Menu Operations” (page 97) for
information about menu operations.
1 Select FILE >Lens in the setup menu.
To assign a name to the data before saving
it
Assign a name before proceeding to step 2.
For details, see “To assign names to files”
(page 144).
Saving and Loading
Lens Files
Setting Lens File Data
Setting data Sub-items
V modulation shading
compensation values
M V Modulation
Center marker position Lens Center H
Lens Center V
Flare level Lens R Flare
Lens G Flare
Lens B Flare
White balance
compensation value
Lens W-R Offset
Lens W-B Offset
White shading
compensation value
L R/G/B H Saw
L R/G/B H Para
L R/G/B V Saw
L R/G/B V Para
Saving Lens Files
To Next Page
