Sony PVM-9L1 - Rear Cover Assembly; A Board

1-3
PVM-9L1
1-3-3. Rear Cover Assembly
. Remove the top cover. (Refer to 1-3-1.)
4 Four screws
(+BVTP 3 x 10)
3 Screw
(+PSW 3 x 10)
5 Rear cover assembly
2 Two screws
(+K 3 x 6)
1 Two screws
(+K 3 x 6)
CN101
CN1501
1-3-4. A Board
. Remove the rear cover assembly. (Refer to 1-3-3.)
3 Three screws
(+PWHTP 3 x 10)
6 A board
2 Anode cap
1 Remove the harness.
CN3501
CN301
Focus
Screen
CN102
CN801
CN802
Dowel
4 Remove the A board
in the direction of the arrow.
5 Power switch button
Note : Be careful not to damage
the power switch button.