Sony SA-VA100 - Tape Deck Operations: Recording Other Components via Speaker Controls; Recording Other Components Using Speaker Controls

55
Operating the Tape Deck Using OSD
6
Click d repeatedly to select how to record the
tape.
To record Click to display
One side of the tape D
Both sides* Å or ß
* Recording always stops at the end of the reverse side.
Be sure to start from the front side.
7 Click DOLBY NR to select “DOLBY NR: B” or
“DOLBY NR: C” when you want to reduce tape
hiss in low-level, high- frequency signals.
8 Click REC.
“REC” appears and the tape deck enters recording
pause mode. The direction indicator in the REC
EDIT control panel (() indicates the direction in
which recording will start.
If you want to record on the reverse side only
Click 9 so that 9 appears.
9 Click P, in the REC EDIT control panel, to release
recording pause. Recording starts.
You can also start recording by clicking ( or 9.
10Start playing the program source. See the
operating instructions supplied with the
respective equipment for details.
To stop recording
Click p in the REC EDIT control panel.
To insert a blank space
See “Inserting a Blank Space During Recording (rec mute)”
on page 56.
To exit to the main menu.
Click EXIT or press EXIT on the remote control.
Note
Adjusting the volume will not effect the recording level.
But this will change the sound levels you hear through the
speakers or headphones.
Recording from other components using
the controls on the speaker
1
Press EJECT § and insert a blank tape into the
tape deck, with the side you want to record facing
forward. Make sure the tabs on the cassette have
not been removed.
2 Press FUNCTION repeatedly to select VIDEO 1 or
VIDEO 2.
3 Prepare the source to play the program you
desire. See the operating instructions supplied
with the respective equipment for details.
4 Press DIRECTION repeatedly to select how to
record the tape.
To record Select
One side of the tape D
Both sides* Å or ß
* Recording always stops at the end of the reverse
side. Be sure to start from the front side.
5 Press DOLBY NR repeatedly to select DOLBY NR
B or C when you want to reduce tape hiss in low-
level, high- frequency signals.
REC EDIT
REC EDIT
EXIT
09() pP§
REC
RESET
0000
DOLBY NR
§
DOLBY
NR:
OFF
90)(pPr
6
7
6
4
1
5
2
(continued)