73
Virtual surround setting
DVD Additional Operations
Notes
• When the playing signal does not contain a signal for the rear speakers, the surround effects
will be difficult to hear.
• When you activate the surround effect, turn off the surround setting of the connected TV or
amplifier (receiver).
• Make sure that your listening position is between and at an equal distance from your
speakers, and that the speakers are located in similar surroundings.
• If you use the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack and set “Dolby
Digital” to “Dolby Digital” or “DTS” to “On” in “AUDIO SETUP” menu, sound will come
from your speakers but it will not have the surround effect.
• Portions of this product are licensed from Desper Products, Inc., a subsidiary of Spatializer
Audio Laboratories, Inc. Copyright ©1997-2001Spatializer®, N-2-2™, and the circle-in-
square device are trademarks of Desper Products, Inc.
To Next Page
Loading...
