28
GB
You can connect two subwoofers to the
receiver. The same signals are output from
each of the PRE OUT SUBWOOFER jacks.
Tip
You can loosen or tighten the SPEAKERS terminal
easily using the supplied speaker cord connection
tool.
ZONE 2 connection
Only if you do not use surround back speakers,
you can assign the SURROUND BACK
(ZONE 2) terminals F and G to the speakers
of zone 2. Set the SURROUND BACK
(ZONE 2) terminals to “Zone2 Speakers” in
“Speaker Connection” in the Speaker Settings
menu (page 95).
See “Using Multi-zone Features” (page 68)
for details on connection and operation in
zone 2.
Speaker cord
connection tool
Loosen
Tighten
To Next Page
Loading...
