105
GB
Adjusting Settings
Lets you convert the resolution of analog video input signal in zone 2.
x Direct
x 480i/576i
x 480p/576p
x 720p
x 1080i
a : Video signals are output at the resolution specified in the “Resolution” menu.
z : Video signals are output without a video conversion or processing.
– : Video signals are not output.
* When the content is protected by Macrovision,
video signals may be output at the 480p/576p
resolution.
Zone Resolution
“Zone
Resolution”
menu setting
HDMI OUT
jacks
ZONE 2
COMPONENT
VIDEO OUT jacks
ZONE 2 VIDEO
OUT jack
DIRECT HDMI IN jacks z ––
COMPONENT VIDEO IN
jacks
– z –
VIDEO IN jacks – – z
480i/576i
(factory default
setting)
HDMI IN jacks z ––
COMPONENT VIDEO IN
jacks
– aa
VIDEO IN jacks – az
480p/576p HDMI IN jacks z ––
COMPONENT VIDEO IN
jacks
– a –
VIDEO IN jacks – a –
720p, 1080i HDMI IN jacks z ––
COMPONENT VIDEO IN
jacks
– a*–
VIDEO IN jacks – a*–
Input from
Output from
To Next Page
Loading...
