Sony STR-DA5800ES - The Remote Control

87
GB
Using Other Features
1 Press ?/1 while pressing RM
SET UP.
The AMP and ZONE buttons flash.
2 Press AMP.
The ZONE button goes off, the AMP
button keeps flashing and the SHIFT
button lights up.
3 Press the numeric button 1 or 2
while the AMP button is
flashing.
When you press 1, the command mode is
set to COMMAND MODE AV1. When
you press 2, the command mode is set to
COMMAND MODE AV2.
The AMP button lights up.
4 Press ENT/MEM.
The AMP button flashes twice, then the
command mode setting process is
completed.
Press MUTING and at the same
time while pressing DISPLAY.
Switching the command mode of
the remote control
ZONE
?/1
AMP
ENT/
MEM
1, 2
RM SET
UP
SHIFT
Switching the command mode of
the simple remote control
DISPLAY
MUTING