• SIDE/LO
Select if the location of your surround
speakers corresponds to sections O and O.
• SIDE/HI
Select if the location of your surround
speakers corresponds to sections O and _}.
• BEHD/LO
Select if the location of your surround
speakers corresponds to sections O and O.
• BEHD/HI
Select if the location of your surround
speakers corresponds to sections O and 1_.
Tip
Sum)uud speaker position is designed specifically
for implementatiou of the Cinema Studio EX mudes.
For other sound fields, speaker position is not so
critical
Those sound fields were designed under the premise
that the surround speakers would be located behind
the listening position, but presentation rmnaius
fairly consistent even with the surround speakers
positioned at a rather wide angle. However. if the
speakers are poiuting toward the listmmr from the
immediate lell and right of the listening positiun, the
surround elt'ccts become uuclear uu]uss set to
"SIDE/LO" or "SIDE/HI'.
Nevertheless. each listening euviroumm_t has many
variables, such as wall reflections, and you may
obtain better results using "BEHD/HI" if your
speakers are located high above the listeniug
positiuu, even if they are located to the immediate
lefl and right.
Thereli)re. although it may result in a setting
contrary to the above explanatiuu, we recommend
that yuu playback multi chamlel surround eucuded
software and select the setting that provides a guod
sense of spaciousness and that best succeeds in
lk)rmiug a cohesive space between the surround
sound fi'om the surround speakers and the sound of
the front speakers. If yuu are not sure which sounds
best. select "BEHD/LO" or "BEHD/HI" and then
use the speaker distance parameter and speaker level
a{ljustmeuts tu obtain proper balance.
• CRS. FREQ (Speaker crossover
frequency)
Lets you set the bass crossover frequency of
the speakers that have been set to "SMALL"
on the SYSTEM menu. This setup item is only
available when at least one speaker is set to
"SMALL" and the corresponding speaker
indicator flashes on the display.
• DIMMER (Brightness of the
display)
Lets you adjust the brightness in 3 steps.
3
O
"O
o
45 G8
To Next Page
Loading...
