If you are using multiple wireless systems such as wireless LANs (Local Area Networks), the
wireless signals may be unstable. In this case, playback stability may be improved by setting
the priority radio frequency channel for Screen mirroring.
[192] Adjusting Settings
Network Settings
Displaying the connected home network server
(Connection Server Settings)
You can change the display settings of the connected server, check the connection or remove
the server from the list.
[193] Adjusting Settings Network Settings
Enabling automatic access from a newly detected
controller device (Auto Home Network Access
Permission)
You can set whether or not the receiver allows automatic access from a newly detected
controller device on the home network.
[194] Adjusting Settings
Network Settings
Setting whether to control this receiver from a
controller device on the home network (Home
Network Access Control)
Select [Setup] - [Network Settings] from the home menu.
1
Select [Screen mirroring RF Setting].
2
Select the setting you want.
Auto: Select this in normal conditions. The receiver automatically selects the better
channel for Screen mirroring.
CH1/CH6/CH11: The selected channel is prioritized for Screen mirroring connections.
3
Select [Setup] - [Network Settings] from the home menu.
1
Select [Connection Server Settings].
2
Select [Setup] - [Network Settings] from the home menu.
1
Select [Auto Home Network Access Permission].
2
Select [On] or [Off].
3
To Next Page
Loading...
