[216] Adjusting Settings System Settings
Updating the software automatically (Auto Update
Settings)
You can set the software to update automatically. If you set [Auto Update] to [On], the auto
update is performed from 2:00 AM to 5:00 AM of the selected time zone.
Note
To use the auto update function, set [Auto Update] to [On].
To update the software at the midnight while the receiver is not used, set [Auto Update] to [On] and
also set [Quick Start/Network Standby] (*) to [On].
If [Auto Update] is set to [On] while [Quick Start/Network Standby] (*) is set to [Off], update starts
automatically while the receiver is turned off.
Depending on the provided update type, the update may start automatically even if [Auto Update] is
set to [Off], or the update may start automatically while the receiver is turned off.
[217] Adjusting Settings System Settings
Updating the software (Software Update)
Select [Setup] - [System Settings] from the home menu.
1
Select [Auto Update Settings].
2
Select [Auto Update] and set to [On].
3
Confirm [Time Zone] is selected and then press
.
4
Select the area and then select the nearest city to where you live.
5
For USA, Canadian and Oceanian models only.
*
Select [Setup] - [System Settings] from the home menu.
1
Select [Software Update].
2
Select [Update via Internet] or [Update via USB Memory].
If you select [Update via USB Memory], please visit the customer support website to
download the latest software version.
3
Update the software.
[UPDATING] flashes on the display panel during the software update process. However,
[UPDATING] may disappear temporary during updating.
When the update is completed, [COMPLETE] appears on the display panel and the
receiver restarts automatically.
4
To Next Page
Loading...
