When [ZONE2 Terminals] is selected and [Zone2 Power] is set to [On], [Zone2 Power] will be set to
[Off] automatically if the [Speaker Pattern] is set to [5.0] or higher.
[107] Using the Multi-Zone Features Enjoying sound from speakers located in other rooms
Assigning speakers for Zone 3
You can assign the speakers installed in Zone 3 as Zone 3 speakers.
Follow the procedure below after connecting the speakers installed in Zone 3 to the SPEAKERS
SURROUND/ZONE 3 terminals of the receiver.
Note
You cannot set the SPEAKERS SURROUND/ZONE 3 terminals for a Zone 3 connection if a speaker
pattern with surround speakers is set.
[108] Using the Multi-Zone Features Enjoying sound from speakers located in other rooms
Enjoying sound in Zone 2 and/or Zone 3
You can enjoy sound from the receiver in Zone 2 and/or Zone 3 by the following procedure.
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Speaker Pattern].
2
Select one of the following speaker patterns displayed on the TV screen:
3.1, 3.0, 2.1 or 2.0, and select [Save].
3
Select [Surround Speaker Assign] - [Zone3].
4
Select [Zone Controls] - [Zone2 Power] or [Zone3 Power] from the home menu.
1
Select [On].
The selected zone is activated.
2
Select [Zone Controls] - [Zone2 Input] or [Zone3 Input] from the home menu.
3
Select the source signals you want to output.
Select [SOURCE] if you want to listen to the same sound as main zone in Zone 2 or Zone
3.
4
Select [Zone Controls] - [Zone2 Volume] or [Zone3 Volume] from the home menu.
5
Adjust to a suitable volume.
6
To Next Page
Loading...
