Sony STR-DN860 - Page 133

Depending on the input, [Input Mode] may be dimmed on the TV screen and other modes
cannot be selected.
When [Analog Direct] is being used, audio input is set to [Analog]. You cannot select
other modes.
Hint
You can also use INPUT SELECTOR on the receiver to select the input in step 1.
[127] Using Other Features
Enjoying video and sound with your desired way of use
Using other video/audio input jacks (Input Assign)
You can reassign the COMPONENT VIDEO (*) and OPTICAL/COAXIAL digital audio input
jacks to other input if the default settings of the jacks do not correspond to your connected
device.
E.g. When connecting a DVD player to the OPTICAL IN 1 (SAT/CATV) and COMPONENT
VIDEO IN SAT/CATV jacks of the STR-DN1060:
Assign the OPTICAL IN 1 (SAT/CATV) jack to [BD/DVD].
Assign the COMPONENT VIDEO IN SAT/CATV jacks to [BD/DVD].
1. Select [Setup] - [Input Settings] from the home menu.
2. Select the input name you want to assign.
3. Press / repeatedly to select [COMPONENT] (*) or [OPTICAL / COAXIAL].
4. Press / repeatedly to select the jack you want to assign.
*
For STR-DN1060 only
Assignable video input jacks (for STR-DN1060 only)
IN:
BD/DVD, GAME, SAT/CATV (*), VIDEO 1, VIDEO 2, SA-CD/CD
None:
BD/DVD (*), GAME (*), SAT/CATV, VIDEO 1 (*), VIDEO 2 (*), SA-CD/CD (*)
Assignable audio input jacks
OPT 1:
STR-DN1060: BD/DVD, GAME, SAT/CATV (*), VIDEO 1, VIDEO 2, SA-CD/CD
STR-DN860: BD/DVD, GAME, SAT/CATV (*), VIDEO, SA-CD/CD