Enjoying sound of an ARC (Audio Return Channel)
compatible TV
If your TV supports the Audio Return Channel (ARC) function, set the receiver by the
following procedure to output the sound of the TV from the speakers connected to the
receiver.
1. Select [Setup] - [HDMI Settings] from the home menu.
2. Select [Control for HDMI].
3. Select [On].
If you connect to a TV that is not compatible with the Audio Return
Channel (ARC) function or you want to select an audio signal using a
cable other than an HDMI cable (e.g. via an optical digital cable or an
audio cable)
Switch the audio input mode.
Note
Be sure to turn off the volume of the TV or activate the muting function of the TV.
If your TV does not support the System Audio Control function, set [Audio Out] to [TV +
AMP] in the HDMI Settings menu to output the sound of the TV from the TV speaker and
the speakers connected to the receiver.
[53] Enjoying Video and Sound
Playing AV devices
Watching HDCP 2.2 Copyright-protected Content
To watch HDCP 2.2 copyright-protected content such as 4K content, connect the receiver
and TV via an HDCP 2.2-compatible HDMI jack. You can only view copyright-protected 4K
content through the HDCP 2.2-compatible HDMI jack connection. For details on whether the
TV and 4K devices are equipped with an HDCP 2.2-compatible HDMI jack, refer to the
operating instructions of the TV and 4K devices.
[54] Enjoying Video and Sound Playing content from an iPhone/iPad/iPod
Enjoying audio content stored on an iPhone/iPod via the
To Next Page
Loading...
Need help?
General
Weight and Dimensions
