2. Select [HDMI Deep Color Output].
3. Select the setting you want.
Auto
12bit: Outputs 12bit video signals if the connected TV is compatible with Deep
Color.
10bit: Outputs 10bit video signals if the connected TV is compatible with Deep
Color.
Off: Select this if the picture is unstable or the colors appear unnatural.
Note
This function does not work when [YCbCr/RGB (HDMI)] is set to [RGB]. In this case, the
output signal is fixed as RGB.
The [HDMI Deep Color Output] setting does not affect video signals from the HDMI IN
jacks.
[171] Adjusting Settings
Screen Settings
Smoothing the gradation of video signals (SBM (Super
Bit Mapping))
The SBM (Super Bit Mapping) is a function that processes and outputs a smooth gradation
video signal from the HDMI OUT jack.
1. Select [Setup] - [Screen Settings] from the home menu.
2. Select [SBM].
3. Select the setting you want.
On: Smoothes the gradation of video signals output from the HDMI OUT jack.
Off: Select this if distorted video signals or unnatural color is output.
Note
[SBM] setting does not affect to video signals from the HDMI IN jacks.
[172] Adjusting Settings
HDMI Settings
To Next Page
Loading...
