You can display the software license information.
1. Select [Setup] - [System Settings] from the home menu.
2. Select [Software License Information].
3. Follow the on-screen instructions.
[214] Adjusting Settings System Settings
Updating the software automatically (Auto Update
Settings)
You can set the software to update automatically. If you set [Auto Update] to [On], the auto
update is performed from 2:00 AM to 5:00 AM of the selected time zone.
1. Select [Setup] - [System Settings] from the home menu.
2. Select [Auto Update Settings].
3. Select [Auto Update] and set to [On].
4. Confirm [Time Zone] is selected and then press .
5. Select the area and then select the nearest city to where you live.
Note
To use the auto update function, set [Auto Update] to [On].
To update the software at the midnight while the receiver is not used, set [Auto Update] to
[On] and also set [Quick Start/Network Standby] to [On].
If [Auto Update] is set to [On] while [Quick Start/Network Standby] is set to [Off], update
starts automatically while the receiver is turned off.
Depending on the provided update type, the update may start automatically even if [Auto
Update] is set to [Off], or the update may start automatically while the receiver is turned
off.
[215] Adjusting Settings
System Settings
To Next Page
Loading...
