HDMI Audio Out [AUDIO OUT]
AMP, TV+AMP
HDMI Subwoofer Level [SW LEVEL]
SW AUTO, SW +10 dB, SW 0 dB
Fast View [FAST VIEW]
AUTO, OFF
MHL Auto Input [MHL.AUTO IN]
ON, OFF
BLUETOOTH settings [<BT>]
BLUETOOTH Mode [BT MODE] (*9)
RECEIVE, TRANSMIT, OFF
BLUETOOTH AAC [BT AAC] (*10)
AAC ON, AAC OFF
BLUETOOTH LDAC [BT LDAC] (*10)
LDAC ON, LDAC OFF
Wireless Playback Quality [QUALITY] (*11)
AUTO, SOUND, STANDARD, CONNECTION
BLUETOOTH Standby [BT STANDBY] (*10)
STBY ON, STBY OFF
System settings [<SYSTEM>]
Remote Start [RM START]
ON, OFF
Auto standby mode [AUTO STBY]
STBY ON, STBY OFF
Quick Start/Network Standby [QUICK.START] (for USA, Canadian and Asia-Pacific
models only)
MODE ON, MODE OFF
Version display [VERSION] (*12)
XXX.X.XXXX
Sleep timer [SLEEP]
OFF - 0:30:00 - 1:00:00 - 1:30:00 - 2:00:00
*1
You can select this setting only when you have performed Auto Calibration and saved the
settings.
*2
Some parameters or settings may not be available depending on the speaker pattern setting.
*3
XXX represents a speaker channel (FL, FR, CNT, SL, SR, SB, SBL, SBR, LH, RH, SW).
*4
You can only select this parameter if [SP PATTERN] is set to a pattern with front high
speakers. (i.e. 5/2.1, 5/2, 4/2.1, 4/2)
*5
You can only select this parameter if [SP PATTERN] is not set to a pattern with surround
speakers. (i.e. 3/0.1, 3/0, 2/0.1, 2/0)
*6
You can only select this parameter if [SP PATTERN] is not set to a pattern with surround back
To Next Page
Loading...
