FM wire antenna (aerial) (supplied)
Note
Be sure to fully extend the FM wire antenna (aerial).
After connecting the FM wire antenna (aerial), keep it as horizontal as possible.
[32] Preparation
4. Connecting audio-visual devices and the antennas (aerials)
Connecting another amplifier in Zone 2 (for STR-
DN1060 only)
You can enjoy sound from a device connected to the receiver in a zone other than the main
zone. For example, you can watch a DVD in the main zone and listen to a CD in Zone 2.
Speakers
Amplifier/receiver
Audio cable (not supplied)
Note
Only audio signals from [USB], [Bluetooth] (only when in BLUETOOTH RX mode), [Home
Network], [Music Services], [FM TUNER] and audio signals input from AUDIO IN jacks
are output to the Zone 2 speakers.
External digital input from OPTICAL IN, COAXIAL IN, HDMI IN jacks and Screen mirroring
cannot be output to Zone 2.
[33] Preparation
4. Connecting audio-visual devices and the antennas (aerials)
To Next Page
Loading...
