1. Select [Setup] - [Network Settings] from the home menu.
2. Select [Connection Server Settings].
3. Select the server which you want to delete and press OPTIONS.
4. Select [Remove] from the options menu.
5. Select [OK] on the confirmation display.
[The device has been removed from the list.] appears on the TV screen, and the
selected server is deleted.
Note
A server will appear in the server list even after being deleted from the list if the receiver
finds it on the network (such as when you refresh the server list).
[81] Using Network Features
Enjoying content stored on a server on the home network
Setting whether to control this receiver from a controller
device on the home network (Renderer Access Control)
You can check a list of products compatible with a controller on the home network and set
whether or not each product is accessible via this receiver.
1. Select [Setup] - [Network Settings] from the home menu.
2. Select [Renderer Access Control].
A list of registered controllers appears (up to 40 devices).
3. Select the controller you want to set and press .
4. Select the setting you want.
Allow: Permits access from the controller.
Block: Blocks access from the controller.
[82] Using Network Features Enjoying audio content from iTunes or an iPhone/iPad/iPod
via the network (AirPlay)
To Next Page
Loading...
