2. Select [Zone2 Line Out] or [Zone3 Line Out].
3. Select the setting you want.
Variable:
Select when you cannot adjust the volume level on the amplifier in zone 2 or zone 3.
The volume level of the receiver output in zone 2 or zone 3 will become adjustable.
Fixed:
Select to adjust the volume on the amplifier in zone 2 or zone 3. The volume level of
the receiver output in zone 2 or zone 3 on the receiver will be fixed.
Note
When [Variable] is set, the volume is turned down by default. Turn up the volume while
listening to the sound after completing setup.
[42] Using the Multi-Zone Features
Enjoying sound in two rooms (multi-zone feature
using the receiver and another amplifier)
Setting the zone 2 HDMI audio output of connected
devices (Zone2 Audio Out)
You can set the zone 2 HDMI audio signal output for playback devices connected to the
receiver via an HDMI connection.
1. Select [Setup] - [HDMI Setup] from the home menu.
2. Select [Zone2 Audio Out].
3. Select the setting you want.
AMP:
Recommended setting when a TV is connected directly to HDMI OUT B jack.
Sound is output from the speakers connected to the receiver.
Sound is not output from the TV speakers.
Zone2 TV + AMP:
Recommended setting when a TV is connected directly to HDMI OUT B jack.
Sound is output from the TV speakers and the speakers connected to the receiver.
Zone2 AMP:
Recommended setting when another amplifier is connected to HDMI OUT B jack.
Sound is output from the another receiver connected to HDMI OUT B jack.
Sound is not output from ZONE 2 SPEAKER OUT terminals and ZONE 2 AUDIO
To Next Page
Loading...
