37
Chapter 2 Menu
A four-digit password can be specified and applied to
desired menu options to prohibit the menu settings
from being changed without permission. The password
is set with the PASSWORD menu.
A password is always assigned to the PASSWORD
menu (factory setting: 9999).
A password for a service man can be created with the
MAINTENANCE menu.
Use of the password
The message “ENTER PASSWORD” is displayed
when an attempt is made to select a menu item for
which the password has been applied. Then, enter the
password using numeric keypad.
If the password is not entered correctly
If an incorrect password is entered, the display returns
to the menu of the previous level.
Setting the Password (SET UP 3) — PASSWORD
Menu
Overview
Structure of the PASSWORD Menu
[C3]
Level 1 Level 2 Level 3 Level 4 Level 5
INPUT CONFIGURATION [C1]
REMOTE [C2]
PASSWORD [C3] ENTER [C31] CHANGE
SYSTEM CONFIGURATION [C4] PASSWORD PASSWORD [C311] ENTER RE-ENTER
ON SCREEN SET [C5] PASSWORD [C3111] PASSWORD
ALIGNMENT [C6]
EXTEND MENU [C7] APPLY CONTROL PRESET ADJ
PASSWORD [C312] COLOR TEMP ADJ
SET UP
MEMORY CARD
COPY
KEY PROTECT
Setting Lists of the PASSWORD Menu
This section explains the setting lists displayed in the
menu.
How to read the setting lists
•For purposes of explanation, each setting list is
preceded by a menu number. These numbers are not
displayed on the screen.
For more information about the menu number, see “About
menu numbers” on page 19.
•The arrow mark (÷) refers you to another setting list
that appears after you make the setting, or to an
operation that is carried out as a result of the setting.
When there is no arrow mark, the menu does not
have any sub-list.
38
Chapter 2 Menu
[C31] ENTER PASSWORD menu
Enter the password for the PASSWORD menu.
Choose what action to perform with the password.
CHANGE PASSWORD: Change the password.
÷[C311]
APPLY PASSWORD: Assign the password to a
menu item. ÷[C312]
[C311] CHANGE PASSWORD menu
Change the password.
ENTER PASSWORD: Enter a new password.
÷[C3111]
[C312] APPLY PASSWORD menu
Choose whether or not to apply the password to each
menu.
CONTROL PRESET ADJ: Select YES or NO.
CONTROL TEMP ADJ: Select YES or NO.
SET UP: Select YES or NO.
MEMORY CARD: Select YES or NO.
COPY: Select YES or NO.
KEY PROTECT: Select YES or NO.
[C3111] ENTER PASSWORD menu
Create a new password.
RE-ENTER PASSWORD
Enter the new password again and press the
ENTER button. ÷ The password is required.
To change it, press the MENU button. ÷ Return
to the PASSWORD [C31].
Setting the Password (SET UP 3) — PASSWORD Menu
To Next Page
Loading...
