Sony Trinitron KV-13VM30 - Page 29

Using the Timer-Activated Functions
INDEX MARK ERASE
— 1» sLow — x?
C5, -G-
Ld] il >
G5
“« > >>
Co. "Go CG)
@- O«-C)
RM-Y138/W
To display the time
Press DISPLAY.
To return to the normal screen
Press MENU.
The internal clock of this VIDEO TV
operates on a 12-hour cycle.
12:00 PM stands for noon.
12:00 AM stands for midnight. |
Ali the settings including CLOCK will be
erased if you unplug the VIDEO TV or a
power failure occurs. Reset the current
time by following steps 1-11.
You cannot change the clock during Timer
Recording. To change the clock, stop the
recording.
Press RETURN.
“Set the day” appears on the screen.
CURRENT TIME
A ee
> MENU
RETURN
Set the day
Use ¢ (RETURN MENU)
8 Press A+ or V- to set the day.
Each time you press A+ or \7-, the day changes consecutively.
Press RETURN.
“Set the year” appears on the screen.
»
mcs
9 Press A+ or V’- to set the year.
Each time you press A+ or \’-, the year changes in sequence and the day of the week
automatically changes.
CURRENT TIME
2/26 /a- m= --:----
> MENU
RETURN
Set the year
Use 4 Exit (MENU)
CURRENT TIME
2/25/96 SUN 12:00AM
Press RETURN. 2/25/8
“Set the time” appears on the screen.
Set the time
Use ¢ (RETuAN Exit (MENU)
1 0 Press A+ or V- to set the hour.
Each time you press A+ or V-, the hour changes in sequence starting with
“12:00AM.”
CURRENT TIME
Press
RETURN.
3/28/96
SUN
11:00AM
Set the time
Use ¢ (RETURN
Exit (Meng)
1 1 Press A+ or V- to set the minute.
Each time you press A+ or \7-, the minute changes in sequence.
CURRENT TIME
>» 2/25/96 SUN 11:00AM
MENU
Press RETURN.
The setting is completed and the clock starts.
Use ¢ Exit [MENG
Chapter 3 : Using Advanced TV Features
29
suoijouny pajealyay-sawil, ay3 Buisp)