Sony Trinitron KV-XA29 - Page 30

30
Adjusting Your Setup (MENU)
Changing the Channel Preset (“CH PRESET”) setting (continued)
Presetting channels manually
1
After selecting “MANUAL
PROGRAM”, select the
program number to which you
want to preset a channel.
(1) Make sure “PR” is
selected , then press
ENTER.
(2)
Press V or v until the
program number you
want to preset (e.g.,
program number
“10”) appears on the
menu, then press ENTER.
Tip
• You can also select the program number with the PROGR +/– or number buttons.
2
Select the desired channel.
(1) Make sure either
“VHF LOW”,
“VHF
HIGH” or “UHF” is
selected,
then press
ENTER.
(2) Press V or v until the
desired channel
picture appears on
the TV screen, then
press ENTER.
3
If the sound of the desired
channel is abnormal, select
the appropriate TV system.
(1) Press V or v to select
“TV SYS”, then press
ENTER.
(2) Press V or v until the
sound becomes
normal (e.g., “M”),
then press ENTER.
PR
01:
RAM
VHF
MANUA LPROG
SENS : H I GH
TV SYS:B/G
FINE:AUTO
LOW
PR
10:
RAM
VHF
MANUA LPROG
SENS : H I GH
TV SYS:B/G
FINE:AUTO
LOW
ENTER
PR
10:
RAM
VHF
MANUA LPROG
SENS : H I GH
TV SYS:B/G
FINE:AUTO
LOW
PR
10:
RAM
VHF
MANUA LPROG
SENS : H I GH
TV SYS:B/G
FINE:AUTO
LOW
PR
10:
RAM
VHF
MANUA LPROG
SENS : H I GH
TV SYS : M
FINE:AUTO
LOW
PR
10:
RAM
VHF
MANUA LPROG
SENS : H I G /K
TV SYS : I
B/G
FINE:AUTO
LOW M
D
ENTER ENTER
ENTER ENTER
ENTER ENTER
ENTER ENTER
ENTER ENTER