41
Using Network Features
Network
SMTP Authentication: Check this
check box to arrange for SMTP
authentication to be performed before
sending e-mail.
Account Name: Enter the mail account
name.
Password: Enter the password.
5 Confirm the contents of the e-mail
report.
When you click on [View], the contents
of the e-mail report are displayed.
6 Send the test mail.
Check on the Send test mail check box
then click on [Apply] to send your test
mail to the e-mail address you set.
• The email report function will not work if the
network uses Outbound Port25 blocking,
which prevents access to the SMTP server.
• You cannot use the following characters to
enter the characters in the text box: “ ' ”, “ “
”, “
\ ”, “ & ”, “ < ”, “ > ”
Notes
To Next Page
Loading...
