32
The Function Menu
The Function Menu
The Function menu is used for setting various functions of the projector.
*1: APA functions when a computer signal is input via the RGB input connector (INPUT A/INPUT
B).
*2: The maximum available mic volume is set by the value of “Volume.”
*3: VPL-EW275/EW245/EW225/EX275/EX245/EX225 only.
Items Item descriptions
Vo l u m e
*3
The higher the value, the louder an audio volume and the lower the
value, the lower the audio volume.
Mic Volume
*3
Adjust the volume of the microphone.
*2
Speaker
*3
On/Off: When set to “On,” speaker outputs sound. To not output
sound from the speaker, select “Off.”
Smart APA On/Off: When set to “On,” APA functions automatically when a
signal is input.
*1
CC Display CC1/CC2/CC3/CC4/Text1/Text2/Text3/Text4: Select the closed
caption service (captions or text).
Off: Closed caption does not appear.
Lamp Timer Reset When replacing the lamp, resets the lamp timer (page 54).
Start Up Image On/Off: When set to “On,” the Start Up Image is displayed on the
screen when the projector is powered on.
Notes
To Next Page
Loading...
