Source Technologies ST9917 - Installing Hardware Options; Available Internal Options

3 Navigate to the Configuration tab, and then select Update Now ‑ Ask Printer.
4 Apply the changes.
For Macintosh users
1 From System Preferences in the Apple menu, navigate to your printer, and then select Options & Supplies.
2 Navigate to the list of hardware options, and then add any installed options.
3 Apply the changes.
Installing hardware options
Available internal options
• Intelligent storage drive
– Fonts
• Simplified Chinese
• Traditional Chinese
• Japanese
• Korean
• Arabic
– Mass storage
• Hard disk
• Licensed features
– IPDS
– Bar Code
• Internal solutions port
– RS-232C Serial Interface Card
– Parallel 1284-B Interface Card
– MarkNet
TM
N8230 Fiber Ethernet
Notes:
• An intelligent storage drive or a hard disk is required to activate Forms Merge and some IPDS features.
• Some options are available only in some printer models. For more information, contact the place where
you purchased the printer.
Set up, install, and configure 32