Source Technologies ST9917 - Page 61

Menu item Description
E‑mail Alerts Setup
E‑mail Setup
Device Password
Specify the password to connect to the SMTP server.
E‑mail Alerts Setup
E‑mail Setup
Kerberos 5 REALM
Specify the realm for the Kerberos 5 authentication protocol.
E‑mail Alerts Setup
E‑mail Setup
NTLM Domain
Specify the domain name for the NTLM security protocol.
E‑mail Alerts Setup
E‑mail Setup
Disable “SMTP server not set up” error
(O*)
Disable an SMTP setup error message to appear on the
display.
Error Prevention
Jam Assist
O
On*
Set the printer to check for jammed paper automatically.
Error Prevention
Auto Continue
O
On* (5 seconds)
Auto Continue Time (5*)
Let the printer continue processing or printing a job
automatically after clearing certain attendance conditions.
Note: Auto Continue Time is available only in some printer
models.
Error Prevention
Auto Reboot
Auto Reboot
Reboot when idle
Reboot always*
Reboot never
Set the printer to restart when an error occurs.
Error Prevention
Auto Reboot
Max Auto Reboots (2*)
Set the number of automatic reboots that the printer can
perform.
Error Prevention
Auto Reboot
Auto Reboot Window (720*)
Set the number of seconds before the printer performs an
automatic reboot.
Error Prevention
Auto Reboot
Auto Reboot Counter
Show a read‑only information of the reboot counter.
Error Prevention
Auto Reboot
Reset Auto Reboot Counter
Cancel
Continue
Reset Auto Reboot Counter.
Note: Reset Auto Reboot Counter is available only in some
printer models.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 60