Menu item Description
Tray Configuration
Multiple Universal Sizes
O*
On
Set the tray to support multiple universal sizes.
Reports
Menu Settings Page
Event Log
Event Log Summary
Print reports about printer menu settings, status, and event
logs.
Supply Usage And Counters
Clear Supply Usage History
Reset the supply usage history to the factory default level.
Supply Usage And Counters
Reset Maintenance Counter
Reset the counter after installing a new maintenance kit.
Printer Emulations
PPDS Emulation
O*
On
Set the printer to recognize and use the PPDS data stream.
Printer Emulations
PS Emulation
O
On*
Set the printer to recognize and use the PS data stream.
Printer Emulations
Enable Formsmerge
O*
On
Activate Forms Merge to store the forms into the hard disk or
intelligent storage drive (ISD).
Note: A hard disk or an ISD must be installed.
Printer Emulations
Enable Prescribe
O*
On
Activate Prescribe.
Note: The Prescribe license must be installed.
Printer Emulations
Emulator Security
Page Timeout (60 minutes*)
Reset Emulator After Job (O*)
Disable Printer Message Access (On*)
Configure the security settings of the printer during emulation
mode.
Print Configuration
Font Sharpening
0–150 (24*)
Set a text point-size value below which the high‑frequency
screens are used when printing font data.
For example, if the value is 24, then all fonts sized 24 points or
less use the high‑frequency screens.
Print Configuration
Print Density
Disabled
1–5 (3*)
Adjust the toner density when printing documents.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 65
To Next Page
Loading...
