Sourcetronic ST600 Series - P05-Input Terminals

Frequency Inverter ST600 Series High-Performance Multifunction VFD Function parameter list
-158-
motor 2
value is a percentage in relative to the rated current of
the motor.
Setting range: 0.0–200.0%
P04.47
IF proportional
coefficient of
asynchronous
motor 2
When IF control is adopted for asynchronous motor 2,
this parameter is used to set the proportional coefficient
of the output current closed-loop control.
Setting range: 0–5000
350
○
P04.48
IF integral
coefficient of
asynchronous
motor 2
When IF control is adopted for asynchronous motor 2,
this parameter is used to set the integral coefficient of
the output current closed-loop control.
Setting range: 0–5000
150
○
P04.49
Starting frequency
point for switching
off IF mode for
asynchronous
motor 2
0.00–P04.51
10.00Hz
○
P04.50
End frequency
point for switching
off IF mode for
asynchronous
motor 1
P04.44–P00.03
25.00Hz
○
P04.51
End frequency
point for switching
off IF mode for
asynchronous
motor 2
P04.49–P00.03
25.00Hz
○
P05––Input terminals
Function
code
Name
Description
Default
value
Modify
P05.00
HDI input type
0x00–0x11
Ones: HDIA input type
0: HDIA is high-speed pulse input
1: HDIA is digital input
Tens: HDIB input type
0: HDIB is high-speed pulse input
1: HDIB is digital input
0x00
◎
P05.01
Function of S1
terminal
0: No function
1: Forward running
2: Reverse running
3: 3-wire control
4: Forward jogging
5: Reverse jogging
6: Coast to stop
7: Fault reset
8: Running pause
9: External fault input
1
◎
P05.02
Function of S2
terminal
4
◎
P05.03
Function of S3
terminal
7
◎
P05.04
Function of S4
terminal
0
◎
P05.05
Function of HDIA
terminal
0
◎