Sourcetronic ST600 Series - EMC Compatibility and Motor Cable Length; Application Standards; CE Marking; EMC Compliance Declaration

Frequency Inverter ST600 Series High-Performance Multifunction VFD Technical data
-343-
B.4.1 EMC compatibility and motor cable length
The following table describes the maximum motor cable lengths of –AS models that meet the
requirements of the EU EMC directive (2014/30/EU).
All models
Maximum motor cable length (m)
Environment category II (C3)
30
You can learn the maximum length of the motor cable through the running parameters of the VFD. To
understand the accurate maximum cable length for using an external EMC filter, contact the local
Sourcetronic office.
For description about the environments categories II (C3), see section B.6 "EMC regulations".
B.5 Application standards
The following table describes the standards that the VFDs comply with.
EN/ISO 13849-1
Safety of machinery––Safety-related parts of control systems––Part 1: General
principles for design
IEC/EN 60204-1
Safety of machinery––Electrical equipment of machines. Part 1: General
requirements
IEC/EN 62061
Safety of machinery––Safety-related functional safety of electrical, electronic,
and programmable electronic control systems
IEC/EN 61800-3
Adjustable speed electrical power drive systems––Part 3:EMC requirements
and specific test methods
IEC/EN 61800-5-1
Adjustable speed electrical power drive systems––Part 5-1: Safety
requirements—Electrical, thermal and energy
IEC/EN 61800-5-2
Adjustable speed electrical power drive systems––Part 5-2: Safety
requirements––Function
GB/T 30844.1
General-purpose variable-frequency adjustable-speed equipment of 1 kV and
lower—Part 1: Technical conditions
GB/T 30844.2
General-purpose variable-frequency adjustable-speed equipment of 1 kV and
lower—Part 2: Test methods
GB/T 30844.3
General-purpose variable-frequency adjustable-speed equipment of 1 kV and
lower—Part 3: Safety regulations
B.5.1 CE marking
The CE marking on the name plate of a VFD indicates that the VFD is CE-compliant, meeting the
regulations of the European low-voltage directive (2014/35/EU) and EMC directive (2014/30/EU).
B.5.2 EMC compliance declaration
European union (EU) stipulates that the electric and electrical devices sold in Europe cannot generate
electromagnetic disturbance that exceeds the limits stipulated in related standards, and can work
properly in environments with certain electromagnetic interference. The EMC product standard (EN
61800-3) describes the EMC standards and specific test methods for adjustable speed electrical
power drive systems. Our products have been compliant with these EMC regulations.