Sourcetronic ST600 Series - Page 312

Frequency Inverter ST600 Series High-Performance Multifunction VFD Expansion cards
-305-
⚫ STX501-1 is equipped with a built-in
antenna and applicable to molded case
machines.
⚫ STX501-2 is configured with an external
sucker antenna and applicable to
sheetmetal machines.
PROFIBUS-DP
communication card
STX503
Supporting the PROFIBUS-DP protocol
CAN multi-protocol
communication card
STX505
⚫ Based on the CAN2.0A and CAN2.0B
physical layer
⚫ Supporting the CANopen protocol
⚫ Adopting Sourcetronic's master-slave
control proprietary protocol
PROFINET
communication card
STX509
Supporting the PROFINET protocol
Ethernet/IP
communication card
STX510
⚫ Supporting the Ethernet IP protocol and
ODVA protocol
⚫ With two Ethernet IP ports, supporting
10/100M half/full duplex operating
⚫ Supporting star, line, and ring network
topologies (but not supporting ring network
monitoring)
Modbus TCP
communication card
STX515
⚫ With two Modbus TCP IO ports, supporting
100M full duplex operating, and supporting
line and star network topologies, with the
nodes up to 32
⚫ Able to function as a Modbus TCP slave
Sin/Cos PG card
SPG502
⚫ Applicable to Sin/Cos encoders with or
without CD signals
⚫ Supporting A, B, Z frequency-divided output
⚫ Supporting input of pulse train reference
Resolver PG card
SPG504-00
⚫ Applicable to resolver encoders
⚫ Supporting simulated A, B, Z frequency-
divided output of resolvers
⚫ Supporting input of pulse train reference
Multi-function
incremental PG card
SPG505-12
⚫ Applicable to OC encoders of 5 V or 12 V
⚫ Applicable to push-pull encoders of 5 V or
12 V
⚫ Applicable to differential encoders of 5 V
⚫ Supporting the orthogonal input of A, B, and
Z
⚫ Supporting the frequency-divided output of A,
B, and Z
⚫ Supporting pulse train setting
24V incremental PG
card
SPG505-24
⚫ Applicable to 24V OC encoders
⚫ Applicable to 24 V push-pull encoders
⚫ Supporting A, B, Z orthogonal input
⚫ Supporting A, B, Z frequency-divided output
⚫ Supporting pulse train reference input