Sourcetronic ST600 Series - Page 322

Frequency Inverter ST600 Series High-Performance Multifunction VFD Expansion cards
-315-
input/output
S6—COM
Digital input 2
2. Power input range: 12–30 V
3. Bidirectional input terminal
4. Max. input frequency: 1 kHz
S7—COM
Digital input 3
S8—COM
Digital input 4
Y2—CME
Digital output
1. Switch capacity: 50 mA/30 V
2. Output frequency range: 0–1 kHz
3. The terminals CME and COM are shorted
through J3 before delivery.
Relay output
RO3A
NO contact of relay 3
1. Contact capacity: 3A/AC 250 V, 1 A/DC 30 V
2. Do not use them as high-frequency digital
outputs.
RO3B
NC contact of relay 3
RO3C
Common contact of
relay 3
RO4A
NO contact of relay 4
RO4C
Common contact of
relay 4
A.4.2 IO expansion card 2 (SIO502-00)
The terminals are arranged as follows.
PT1+
PT-
PT2+
S5
S6
S7
S8
RO4A
RO4C
+24V
PW
COM
COM
RO3A
RO3C
Indicator definition
Indicator
Name
Function
LED1
State indicator
This indicator is on when the expansion card is establishing a
connection with the control board; it blinks periodically after
the expansion card is properly connected to the control board
(the period is 1s, on for 0.5s, and off for the other 0.5s); and it
is off when the expansion card is disconnected from the
control board.
LED4
Power indicator
This indicator is on after the IO expansion card is powered on
by the control board.