To Next PageTo Next PageWhy does my SOYO LCD TV remote control not operate?
If your SOYO LCD TV remote isn't working, first, try replacing the batteries, ensuring they're correctly oriented. Also, make sure the TV's power cord is securely plugged into the wall outlet and that the unit is at least 3-4 feet away from fluorescent lights. Weak batteries could be the reason why the remote control does not operate.
What to do if I cannot change channels with the remote control on my SOYO LCD TV?
To fix the issue where you can't change channels on your SOYO LCD TV using the remote, ensure the main source is set to "TV". If you're using a separate device like a cable box, use the remote that came with that device and select the correct source. This issue occurs because the main source has not been selected to " TV".
How to get PIP view to work on SOYO LCD TV?
To resolve a non-functional PIP view on your SOYO LCD TV, ensure both the MAIN and PIP sources are properly connected. Then, press the "SOURCE" button to select active input sources for both MAIN and PIP. The reason may be that MAIN source and PIP source have not been connected to TV properly or you have not selected correct MAIN and PIP sources.
What to do if there is no PIP window, or the PIP window just shows static on SOYO Onyx DYLT032D?
If there's no PIP window or it only shows static on your SOYO LCD TV, ensure the PIP view is set to a video input or channel with a signal. Cycle through the video inputs by pressing "SOURCE" to select a valid source. This could happen if the PIP view window is set to a video input or channel that has no signal airing.
General| Screen Size | 32 inches |
|---|---|
| Display Technology | LCD |
| Aspect Ratio | 16:9 |
| Brightness | 500 cd/m² |
| Speakers | 2 x 10W |
| Resolution | 1366 x 768 |
| Inputs | HDMI, Component, Composite, VGA, RF |
Essential warnings about preventing electric shock and exposure to rain or moisture.
Detailed explanation of the primary functions of the first ten buttons on the remote control.
Detailed explanation of the remaining functions for buttons 11 through 25 on the remote control.
Details VHF/UHF, S-VIDEO, VIDEO, YCbCr, YPbPr inputs, and AUDIO LINE OUT.
Describes DVI, PC(RGB) input jacks, AUDIO LINE-IN, and the SERVICE PACK port.
Guide to adjusting picture quality settings like brightness, contrast, and saturation.
How to adjust picture settings when connected to a PC via VGA or DVI.
Instructions for adjusting audio parameters such as bass, treble, and equalizer.
How to set the size and display options for the Picture-in-Picture feature.
Guide to setting up and configuring the Multi-PIP function for multiple video sources.
How to set up channel scanning, selection, and editing for TV signals.
How to set up parental controls to block programs based on content ratings.
Adjustments for OSD timeout, language, factory reset, and boot screen logo.
How to enable and configure closed captioning display modes and options.
